New from JDY Performance!
Our Version 2 DAZA Full-Frame Turbo Kit is capable of making big power on your RS3 or TTRS.
Our kit utilizes only the best quality components to ensure your engine makes reliable power all day every day.
Select from one of three different Xona Rotor Turbochargers to determine your power level. (8264 X3C.9569S X3C, 10569S X3C)
Control boost with a TiAL MVR 44mm External Wastegate including all springs so you can tailor it to your setup! Available in 3 colors (Red, Silver, and Purple)
Our Turbo kit includes everything you need to get your car up and running with no additional hardware or fabrication required!
This kit fits both Left Hand-Drive and Right-Hand Drive vehicles.
NEW features:
Stainless Steel Manifold Heat Shield
JDY V-Band Heat Shielded Turbo Manifold.
- Built-in House
- EGT Ports are added per cylinder for data acquisition and the best tune
- 44mm External Wastegate Provision
- Inconel Heat Shielding
- CMM measured for quality check
JDY V-Band Recirculated Downpipe
- 3.5" Diameter
- Inconel Heat Shielding
- Wastegate Dump Recirculated
- Flex Bellow for stress relief
JDY Midpipe
- 3.5" Diameter
- Inconel Heat Shielding
- Mates up to OEM Midpipes
JDY Installation Hardware (part list would be avaliable in instruction PDF)
- JDY Turbo Inlet Pipe
- JDY Turbo Discharge pipe
- Includes Turbo Oil Fittings
- Oil Feed and Return Line
- Coolant Delete / Crossover pipe to loop the OE Water Lines
- V-Band Clamps
- Intake Clamps
- Turbo Manifold Studs + Nuts
TiAL MVR 44mm Wastegate
- Available in Red, Silver, and Purple
- Includes All Springs for the perfect boost control
Xona Rotor X3C Turbocharger
- Next Gen UHF Turbine
- Water-cooled Dual Row ball bearing cartrige
- CNC machined Billet Stainlesss steel cneter housing
- Dual piston rings for sealing the shaft on both turbine and compressor end
- Intergrated oil filter and Modular Oil drain
- Higher efficiency and faster transient response for maximum power and performance
Pick any of the following depending on your power goals
Xona Rotor X3C 8264S
- Rated for 860HP
- X3CCompressor Cover. 4" Inlet, 2.5" Discharge
- TiAL 84A/R V-Band 310 Stainless Steel Turbine Housing
- Welded Elbow for Plug 'n Play Use with our JDY KIT
Xona Rotor X3C 9569S
- Rated for 1000HP
- X3C Compressor Cover. 4" Inlet, 2.5" Discharge
- TiAL 0.84 A/R V-Band 310 Stainless Steel Turbine Housing
- Welded Elbow for Plug 'n Play Use with our JDY KIT
Xona Rotor X3C 10569S
- Rated for 1100HP
- X3C Compressor Cover. 4" Inlet, 2.5" Discharge
- TiAL 0.84 A/R V-Band 310 Stainless Steel Turbine Housing
- Welded Elbow for Plug 'n Play Use with our JDY KIT
Instruction Manual:
MAC Valve Installation Diagram:
New from JDY Performance!
Our Version 2 DAZA Full-Frame Turbo Kit is capable of making big power on your RS3 or TTRS.
Our kit utilizes only the best quality components to ensure your engine makes reliable power all day every day.
Select from one of three different Xona Rotor Turbochargers to determine your power level. (8264 X3C.9569S X3C, 10569S X3C)
Control boost with a TiAL MVR 44mm External Wastegate including all springs so you can tailor it to your setup! Available in 3 colors (Red, Silver, and Purple)
Our Turbo kit includes everything you need to get your car up and running with no additional hardware or fabrication required!
This kit fits both Left Hand-Drive and Right-Hand Drive vehicles.
NEW features:
Stainless Steel Manifold Heat Shield
JDY V-Band Heat Shielded Turbo Manifold.
- Built-in House
- EGT Ports are added per cylinder for data acquisition and the best tune
- 44mm External Wastegate Provision
- Inconel Heat Shielding
- CMM measured for quality check
JDY V-Band Recirculated Downpipe
- 3.5" Diameter
- Inconel Heat Shielding
- Wastegate Dump Recirculated
- Flex Bellow for stress relief
JDY Midpipe
- 3.5" Diameter
- Inconel Heat Shielding
- Mates up to OEM Midpipes
JDY Installation Hardware (part list would be avaliable in instruction PDF)
- JDY Turbo Inlet Pipe
- JDY Turbo Discharge pipe
- Includes Turbo Oil Fittings
- Oil Feed and Return Line
- Coolant Delete / Crossover pipe to loop the OE Water Lines
- V-Band Clamps
- Intake Clamps
- Turbo Manifold Studs + Nuts
TiAL MVR 44mm Wastegate
- Available in Red, Silver, and Purple
- Includes All Springs for the perfect boost control
Xona Rotor X3C Turbocharger
- Next Gen UHF Turbine
- Water-cooled Dual Row ball bearing cartrige
- CNC machined Billet Stainlesss steel cneter housing
- Dual piston rings for sealing the shaft on both turbine and compressor end
- Intergrated oil filter and Modular Oil drain
- Higher efficiency and faster transient response for maximum power and performance
Pick any of the following depending on your power goals
Xona Rotor X3C 8264S
- Rated for 860HP
- X3CCompressor Cover. 4" Inlet, 2.5" Discharge
- TiAL 84A/R V-Band 310 Stainless Steel Turbine Housing
- Welded Elbow for Plug 'n Play Use with our JDY KIT
Xona Rotor X3C 9569S
- Rated for 1000HP
- X3C Compressor Cover. 4" Inlet, 2.5" Discharge
- TiAL 0.84 A/R V-Band 310 Stainless Steel Turbine Housing
- Welded Elbow for Plug 'n Play Use with our JDY KIT
Xona Rotor X3C 10569S
- Rated for 1100HP
- X3C Compressor Cover. 4" Inlet, 2.5" Discharge
- TiAL 0.84 A/R V-Band 310 Stainless Steel Turbine Housing
- Welded Elbow for Plug 'n Play Use with our JDY KIT
Instruction Manual:
MAC Valve Installation Diagram:
